Charts & Drawings - Cary Audio Design SLI 80 Owner's Manual

CHARTS AND DRAWINGS __________________________________________
Bias Adjustment
Set bias for both sides of the amplifier to 75mA.
Insert meter plug into bias jack.
•
Adjust for 75mA reading on DC current meter.
•
Re-adjust to 75mA after SLI 80 is warmed up for 10 minutes.
•
Remove plug and enjoy the music!
•
Note: Bias is factory preset; Bias should be reset when installing replacement KT-88 / 6550 tubes.
Bias Meter Jack Bias Adjust
11