Upgrade Failed; Shorting The Mainboard Jumper; Cs1732B; Cs1734B - ATEN CS1732b User Manual

CS1732 / CS1734
B B

Upgrade Failed

Shorting the Mainboard Jumper

If the Upgrade Succeeded screen doesn't appear, it means that the upgrade
failed to complete successfully, in which case you should do the following:
1. Power off the CS1732
2. Using a jumper cap, short the jumper on the mainboard labeled J14. The
diagrams indicate the jumper location on the CS1732
CS1732
B
CS1734
B
3. Power on the CS1732
default firmware.
4. Do the firmware upgrade procedure again.
5. After the upgrade procedure completes, power off the switch, remove the
jumper cap from J14, close the housing, and power the CS1732
CS1734 on again.
B
40
User Manual
/ CS1734
B B
/ CS1734
B B
and remove its housing.
. It will now work with the factory
/ CS1734 boards:
B B
/
B