ATEN CS1732A, CS1734A - 2/4-Port USB KVMP Switch Quick Start Guide

Requirements

Console

Computer
The following equipment must be installed on each computer:

• A VGA, SVGA or Multisync card.
• USB Type A port, or PS/2 keyboard and mouse ports.

Cables
Only cable sets specifi cally designed to work with this switch may be used to link to the computers. 2/4 cables sets are provided with the CS-1732A/CS-1734A package.

Hardware Review

1. Port Selection Switches
2. Port LEDs
3. USB Console Ports

1. Console Audio Jacks
2. USB Peripheral ports
3. Firmware Upgrade Section
4. Power Jack
5. Monitor Port
6. CPU Port Section

Hardware Installation

1. Plug your USB keyboard and USB mouse into the USB ports located on the unit's front panel.
2. Plug your monitor, speakers and microphone into the console monitor, speaker and microphone ports located on the unit's rear panel.
3. Plug the KVM cable's SPHD connector into any available CPU port on the switch. Plug the accompanying microphone and speaker cables into the CPU port's microphone and speaker jacks. Be sure that all the plugs are in the same CPU port sockets (all in port 1, all in Port 2, etc.).
4. At the other end of the cable:
   1. For a USB connection, plug the USB, video, microphone and speaker cables into their respective ports on the computer.
   2. For a PS/2 connection, plug the keyboard, mouse, video, microphone and speaker cables into their respective ports on the computer.
5. Repeat steps 3 and 4 for any other computers you are connecting up.
6. If you choose to use external power, plug the power adapter cable into the switch's Power Jack, then plug the power adapter into an AC power source.
7. Turn on the power to the computers.

Operation

1. Invoking Hotkey Mode: Press [Scroll Lock] twice
2. Cycle through the Ports: [Scroll Lock] [Scroll Lock] [Enter]

Detailed Hotkey Operations

[n] represents a number between 1-99

[K] represents the KVM focus

[U] represents the USB device

[S] represents the speakers and microphone

[A] represents Auto Scan function

For a complete list of Hotkey functions, refer to the User manual

Important Notice

Considering environmental protection, ATEN does not provide a fully printed user manual for this product. If the information contained in the Quick Start Guide is not enough for you to configure and operate your product, please visit our website www.aten.com, and download the full user manual.

Online Registration

http://eservice.aten.com

Technical Phone Support

International:
886-2-86926959

North America:
1-888-999-ATEN Ext: 4988

United Kingdom:
44-8-4481-58923

All information, documentation, firmware, software utilities, and specifi cations contained in this package are subject to change without prior notifi cation by the manufacturer. Please visit our website http://www.aten.com/download/?cid=dds for the most up-to-date versions.