Mouse Port Selection; Hot Plugging; Powering Off And Restarting - ATEN CS1732b User Manual

CS1732 / CS1734
B B

Mouse Port Selection

The mouse port-switching function, which allows you to select a port using the
mouse, is a new feature of the latest CS1732
the scroll wheel on the mouse to switch between ports. The mouse port-
switching function allows you to cycle through the ports in sequential order –
1 to 2, 2 to 1 for the CS1732
Note: The default setting for the mouse port-switching function is OFF. To
enable the mouse port-switching function, use the OSD. See Table ,
"MOUSE SWITCHING FUNCTION," on page 33

Hot Plugging

The CS1732 / CS1734
B
removed and added back into the installation by unplugging their cables from
the USB hub ports without the need to shut the unit down.

Powering Off and Restarting

If it becomes necessary to Power Off the unit, before starting it back up you
must do the following:
1. Shut down all the computers that are attached to the switch.
2. Unplug the switch's power adapter cable.
3. Wait 10 seconds, then plug the switch's power adapter cable back in.
4. After the switch is up, Power On the computers.
16
User Manual
; 1 to 2, 2 to 3, 3 to 4, 4 to 1 for the CS1734
B
supports USB hot plugging – components can be
B
/ CS1734 . Simply double-click
B B
.
B