Ford Mercury Villager 1997 Owner's Manual page 38

You can change the frequency up or down one increment at a
time (FM changes in increments of 200 kHz; AM changes
in increments of 10 kHz) by pressing the "TUNE" button. To
change frequencies quickly, press and hold down either the right
or left side of the "TUNE" button.
Manual tuning adjusts your radio to any allowable broadcast
frequency, whether or not a station is present on that
frequency. (See All About Radio Frequencies later in this
chapter.)
Using the "SEEK" function
This feature on your radio allows you to automatically select
listenable stations up or down the frequency band. Press the
right side of the "SEEK" button to select the next
listenable station up the frequency band. Press the left
of the button to select the next listenable station down the
frequency band. By holding the button down, listenable stations
can be passed over to reach the desired station.
Using the "SCAN" button to scan radio stations
Pressing the "SCAN" button once enters the scan mode by
stopping on each listenable station for a five-second sampling.
The radio band (AM/FM1/FM2) in the display window
will blink to indicate that the radio is scanning.
To stop the scan mode on the presently sampled station press
the "SCAN" button again.
34
side