Ford Mercury Villager 1997 Owner's Manual page 196

Installing the Removable Captain Seats
To position the captain seats back in their original positions:
1. Make sure the area around the floor anchor positions is free
from obstruction.
2. With the seatback folded down, two people should lift the seat
into the vehicle.
3. Place the seat slightly behind the floor anchor positions and
catch the rear leg anchors into each anchor position.
4. Press down on the front of the seat to secure the front legs to
the two floor latch locks. Place the seatback in the upright
position.
5. Try to move the seat to be sure that it is securely fastened.
6. Replace any floor mats that were removed.
Labels have been provided on the side of the seats to remind you
of important safety precautions.
Keep foreign objects out of the floor anchors. Objects in
the floor anchors could prevent front and rear seat legs from
engaging properly.
Before sitting in the removable seats, make sure that the
seat legs are securely attached by the floor anchors.
192
WARNING
WARNING