Ford Mercury Villager 1997 Owner's Manual page 179

8. If the shoulder belts are too tight, unlatch the chest clip and
unbuckle the child from the built-in child seat. Allow the
shoulder belts to retract fully. Repeat the procedure from step
3 through step 7.
Removing the child from the built-in child seat
1. Open the chest clip by squeezing together the release tabs on
the top and bottom edges of the center of the chest clip. Pull
the two halves apart.
2. Press the release button on the crotch belt buckle.
3. Slide the shoulder belts off the child's shoulders. Remove the
child from the built-in child seat.
4. Confirm that the shoulder belts are fully retracted and resting
inside the built-in child seat recess. It is unnecessary to
reconnect the shoulder harness and belt buckle prior to storing
the built-in child seat.
5. While holding the tab, rotate the cushion upward until it fits
flush with the second row seatback pad.
Seating and Safety Restraints
175