Mercedes-Benz SLK 350 Operator's Manual page 199

Direct frequency input
Select desired waveband.
Press * button.
Enter desired frequency with
buttons 1 to R.
i
You can only enter frequencies within
the respective waveband.
If a button is not pressed within
four seconds, the radio will return to
the last station tuned.
Manual tuning
Select desired waveband.
Press G or H button for approx.
three seconds.
Press button repeatedly until desired
frequency has been reached.
Step-by-step station tuning takes place
in ascending or descending order. Each
time the button is pressed, the radio
tunes further by 0.2 MHz. During
manual tuning, the radio is muted.
Automatic seek tuning
Select desired waveband.
Press G or H button briefly.
The radio will tune to the next highest
or next lowest receivable frequency.
i
If no station is received after two
consecutive scans of the complete
frequency range, then the scan stops
at the frequency from which it began.
Controls in detail
Audio system
Scan search
Starting scan search
Select desired waveband.
Press SC soft key.
SC will appear in the display. The
radio briefly (approximately
eight seconds) tunes in all receiv-
able stations on the waveband
selected.
Ending scan search
soft key or G or H.
Press SC
The station last played will be
selected and disappears from
SC
the display.
199