Never operate radio transmitters equipped
with a built-in or attached antenna (i.e. with-
out being connected to an external antenna)
from inside the vehicle while the engine is
running. Doing so could lead to a malfunc-
tion of the vehicle's electronic system, pos-
sibly resulting in an accident and/or
personal injury.
You can use the functions in the
to operate your telephone, provided it is
connected to a hands-free system and
switched on.
Switch on the telephone and Audio or
COMAND*.
See separate operating instructions.
Press button è or ÿ repeatedly
until you see the
TEL
menu in the
multifunction display.
Which messages will appear in the multi-
function display depends on whether your
telephone is switched on or off:
If the telephone is switched off, the
message in the multifunction display is:
.
PHONE off
If the telephone is switched on:
The telephone will then search for a
network. During this time the multi-
TEL
menu
function display is empty.
As soon as the telephone has found a
network,
READY
tifunction display.
This standby message indicates that your
telephone is ready for use and you can op-
erate it using the control system.
Answering a call
When your telephone is ready to receive
calls, you can answer a call at any time. In
the multifunction display you will see the
message:
Audio system
is indicated in the mul-
COMAND*
Press button s.
You have answered the call.
The duration of the call appears in the
multifunction display.
Controls in detail
Control system
147