Table of Contents
Advertisement
SpECIAL SETTINGS
Tuning analogue television
channels
This setting is only necessary if you cannot re-
ceive any digital channels and you have not car-
ried out an analogue search during initial setup.
The television channels can be set directly or
using the scan.
Switching the television to
analogue reception
Note:
Analogue channels can be selected if the
7
option »Air« or »Cable« has been selected.
1 Open the »Select input source« menu with
»AV«.
2 Depending on the antenna system, select the
option »Air« or »Cable« with »
>
or »
« as the input source and press »●« to
confirm.
Note:
Additional operations are explained in the
7
following sections.
Setting all analogue television
channels
Analogue channels are displayed in the channel
list after the digital channels.
Note:
Plug the rooftop antenna cable (for analogue
7
television channels) into the
socket on the television.
1 Open the menu with »i«.
2 Select the line »SOURCE SETUP« with »
or »
« and press »●« to confirm.
Λ
– T he »SOURCE SETUP« menu appears.
3 Select the line »Source« with »
and press »●« to confirm.
Select the option »Air« or »Cable« with »
>
»
«, »
« or »
« and press »●« to confirm.
V
Λ
4 Select the line »Automatic Channel Search«
with »
« or »
« and press »●« to confirm.
V
Λ
----------------------------------------------------------------------------------------------------------
<
«, »
«, »
«
V
Λ
5 Select the line »Country« with »
6 Select the line »Scan Typ« with »
7 Start the scan with »
Note:
7
IN«
»ANT
«
V
« or »
«
V
Λ
<
Note:
«,
7
8 Press »
SOURECE SETUP
Source
Automativ Channel Search
Digital Manual Tuning
Analogue Manual Tuning
Program Table
Signal Information
CA - Modul
Beenden
Zurück
and press »●« to confirm. In the country
s election menu, select the country with »
>
»
«, »
« or »
« and press »●« to confirm.
V
Λ
and set the option »ATV« with »
After starting the scan, a security query will
appear. Press »
« (green) to confirm the
option »Yes«.
– A ll channel and favourites lists for the ana-
logue channels will be deleted and com-
piled anew.
– T he »Results« menu appears, and the scan
for TV channels begins. Depending on the
number of television channels received,
this can easily take a few minutes.
– T he search is complete as soon as the »PRO-
GRAM TABLE« appears.
You can abort the search by pressing »
i
« to end the setting.
20.09.2010
15:46
Air
« or »
«
V
Λ
<
«,
« or »
«
V
Λ
<
>
« or »
«.
« (red).
i
«.
61
ENGLISH
Advertisement
Table of Contents
