Table of Contents
Advertisement
HOmE NETwORK
wireless network connection
1 Connect Grundig WiFi USB dongle to the
»uSB« or »uSB
television in order to connect the television
to a wireless network.
28
ENGLISH
------------------------------------------------------------------------------------------------------------
HDD« socket of your
Notes:
Wireless LAN adaptor supports IEEE
7
802.11B/G and N communication protocols.
We recommend you to use IEEE 802.11N
protocol to obtain the best performance in HD
video playback.
If you use a modem that supports IEEE
7
802.11B/G, video playback performance
may be poor when compared to a modem
that supports IEEE 802.11N since the data
transfer rate of IEEE 802.11B/G protocol is
lower.
WiFi USB dongle must directly be connected
7
to »USB« or »USB HDD« socket; USB Hub is
not supported.
Please note that video playback performance
7
in a DLNA application on a wireless local
network depends on the number of users on
the network as it is the case in every wireless
network.
It is recommended to switch off the equipment
7
that are not in use in home network in order
to avoid unnecessary network traffic.
Placing the modem or wireless network
7
sharer on an elevated location will increase
the wireless connection reception strength.
Wireless connection reception strength may
7
vary depending on the type of the modem
and the distance between the modem and
television.
Modem must be transmitting its SSID in order
7
to establish a wireless connection. Television
can not connect to a network without SSID.
When network connection is established
7
through a wireless USB network device,
wireless network connection may be
weak depending on the the strength of the
wireless network in the medium. Extending
the wireless USB network device close to the
television with a USB extension cable will
increase the wireless network performance.
Advertisement
Table of Contents
