Searching For Digital Terrestrial; Tv Channels Automatically - Grundig FINE ARTS 55 C DL User Manual

SpECIAL SETTINGS
Searching for television channels
from the cable provider manu-
ally
1 Open the menu with »i«.
2 Select the line »SOURCE SETUP« with »
or » « and press »●« to confirm.
Λ
– T he »SOURCE SETUP« menu appears.
3 Select the line »Source« with »
and press »●« to confirm.
Select the option »Cable« with »
» « or » « and press »●« to confirm.
V Λ
4 Select » Digital Manual Tuning« with »
» « and press »●« to confirm.
Λ
– T he menu appears.
5 Enter the four-digit frequency with »1 ...
and press »●« to confirm.
– T he search starts after confirming, the
channels found are displayed in the »Re-
sults« menu.
i
6 Press » « to finish the setting.
----------------------------------------------------------------------------------------------------------

Searching for digital terrestrial

TV channels automatically

1 Open the menu with »i«.
2 Select the line »SOURCE SETUP« with »
or »
«
V
– T he »SOURCE SETUP« menu appears.
3 Select the line »Source« with »
or »
« or » «
V Λ
Select the option »Air« with »
»
< >
Λ
«, » «,
Caution:
« or
The antenna power supply (line »Active
V
7
Antenna Power«) may only be switched on
if the antenna is an active indoor antenna
with a signal amplifier and it is not already
0«
s upplied with a voltage via a mains plug
(or similar supply). Otherwise you may
cause a short circuit and irreparably dam-
age your antenna.
4 Select the »Active Antenna Power« with »
or »
for the antenna with »
5 Select the line »Automatic Channel Search«
with »
– T he menu appears.
« and press »●« to confirm.
Λ
« and press »●« to confirm.
Λ
« and press »●« to confirm.
«. Switch on the antenna power supply
Λ
<
« or »
« or » « and press »●« to confirm.
V Λ
SOURCE SETUP
AUTOMATIC CHANNEL
Source
Country
Scan Type
Exit
Back
«
V
«
V
< >
«, » «, » « or
V
«
V
>
« (»On«).
20.09.2010
15:46
SEARCH
Air
U.K.
ATV & DTV
Start Search
59
ENGLISH