Table of Contents
Advertisement
CONVENIENCE FuNCTIONS
Setting the date and time
Setting the time
Your television set detects the difference in time
to Greenwich Mean Time (GMT) automatically,
as long as the channel selected transmits a time
signal. You can also set the difference in time
manually – for example, when the correct time
is not detected automatically or does not corre-
spond to local time for other reasons.
1 Select the line »Time Adjustment« with »
then select the option »Manual« with »
>
or »
«.
– T he lines »Time Zone« and »Daylight Sav-
ing« are active.
2 Select the line »Time Zone« with »
press »●« to confirm.
– T he »Select Time Zone« menu appears.
3
Select the appropriate time zone with » »
>
»
«, »
« or »
and press »●« to confirm.
V
Λ
4 Select the line »Daylight Saving« with »
<
>
and use »
« or »
»Off« or »On«.
i
5 Press »
« to finish the setting.
« and
V
« to set the option »Auto«,
------------------------------------------------------------------------
Timer settings
Entering the switch-off time
(sleep timer)
In the »Sleep Timer« menu you can enter a time
for the television to switch off. After this time
has elapsed, the television switches to standby
mode.
1 Select the line »Sleep Timer« with »
»
«.
Λ
«,
V
2 Enter the switch-off time with »
<
«
Note:
To switch off the function, use »
7
set the switch-off time to »Off«.
3 Press »i« to end the set-up.
Switch-on timer
In the »Auto On« menu you can enter a switch-on
<
«,
time for the television. After the preset time has
elapsed, the television switches on from standby
– at the preselected volume and the preselected
«
V
television channel.
1 Select the line »Auto On« with »
and press »●« to confirm.
2 Select the line »Mode« with »
<
use »
« or »
should switch on.
3 Select the line »Input Source« with »
<
and use »
4 Select the line »Service Type« with »
<
and use »
tion (ATV, DTV, Radio or DATA).
5 Select the line »Channel« with »
and use »
channel.
Note:
The line »Channel« is only active when the in-
7
put signal currently in use has been set. If no
entry has been made, then the first channel of
the selected input source will be used.
<
« or »
« or »
V
>
« to select when the television
>
« or »
« to select the input source.
>
« or »
« to select the p referred op-
<
>
« or »
« to select the preferred
ENGLISH
« or
V
>
«.
<
>
« or »
« to
« or »
«
V
Λ
« and
Λ
« or »
«
V
Λ
« or »
«
V
Λ
« or »
«
V
Λ
47
Advertisement
Table of Contents
