Table of Contents
Advertisement
HOmE NETwORK
manual connection
Certain networks require Static IP address. If
your network requires a Static IP address, you
must enter the »IP Address«, »Netmask«, »Gate-
way« and »DNS« values manually. You can ob-
tain your »IP Address«, »Netmask«, »Gateway«
and »DNS« values from your Internet Service
Provider (ISP).
1 Open the menu with »i«.
2 Select »CONNECTED APPS« with »
and confirm with »●«. Menu is displayed.
3 Select »Network Settings« with »
and confirm with »●«.
– » NETWORK SETTINGS« menu is displayed.
CONNECTED APPS
NETWORK SETTINGS
Connection
Select Access Point
Connection Type
Connection Settings
IP Address
Netmask
Gateway
DNS
4 Select »Connection« with »
then select »Wireless« with »
5 Select »Select Access Point« with »
»
« and confirm with »●«.
Λ
– » Select Access Point« menu appears and
available wireless networks are scanned
and displayed in the menu.
6 Select the network that you want to connect
with »
«, »
«, »
V
Λ
»●«.
– W ireless connection password screen is
displayed.
30
ENGLISH
------------------------------------------------------------------------------------------------------------
« or »
V
« or »
V
Wireless
- -
Auto
192.168.1.100
255.255.255.0
192.168.1.1
192.168.1.1
Connect
Exit
Back
Test
« or »
« and
V
Λ
<
>
« or »
«.
V
<
>
« or »
« and confirm with
7 Select the required character with »
<
»
« and »
with »●«.
– S elect »ABC« for uppercase and »abc«
for lower case and confirm with »●«.
– S elect »?@123« for numbers and symbols
and confirm with »●«.
– E nter the password, select »Confirm« with
»
«, »
V
»●«.
«
Λ
Note:
In WEP encryption system, more than one
7
«
Λ
network password can be assigned for the
network. Your television can only connect to
network with level 1 password.
8 Select »Connection Type« with »
and then select »Manual« with »
– » IP Address«, »Netmask«, »Gateway« and
»DNS« options are active.
9 Select »IP Address« with »
Enter the IP address with »1...0« and press
»
« (green) to save the value.
10 Select »Netmask« with »
Enter the Netmask with »1...0« and press
»
« (green) to save the value.
11 Select »Gateway« with »
Enter the Gateway with »1...0« and press
»
« (green) to save the value.
12 Select »DNS« with »
the DNS address with »1...0« and press
»
« (green) to save the value.
13 Select »Connect« with »
the modem connection.
– T he mesage »Testing ... Please waite«
« or
appears.
14 Press »
network connection is established with the
current settings.
– T he messages »Testing ... Please waite«
appears, after successfull announcement
the messages »Connecting To Gateway:
Successful« and then the MAC address.
15 Press »i« to end the setting.
>
« and move to the next character
<
>
«, »
« or »
« and confirm with
Λ
« and press »●«.
V
« and press »●«.
V
« and press »●«.
V
« and press »●«. Enter
V
« (red) to establish
« (green) to make sure that the
«, »
«,
V
Λ
« or »
«
V
Λ
<
>
« or »
«.
Advertisement
Table of Contents
