Table of Contents
Advertisement
HOmE NETwORK
wireless network settings
There are two ways of making the wireless net-
work settings.
A Automatic connection,
» Apart from Access Point Selection, all data
regarding the connection settings (»IP Ad-
dress«, »Netmask«, »Gateway« and »DNS«)
are obtained from modem automatically.
B Manual connection,
a ll connection settings (»IP Address«, »Net-
mask«, »Gateway« and »DNS«) must be
configured manually.
Automatic connection
Most of the home networks are Dynamic. If you
have a dynamic network, you must use a DSL
modem that supports DHCP. Modems and IP
sharers that support DHCP obtain the »DNS«
values that are required for »IP Address«, »Net-
mask«, »Gateway« and internet access auto-
matically, and thus you are not required to enter
those values manually.
1 Open the menu with »i«.
2 Select »CONNECTED APPS« with »
and confirm with »●«. Menu is displayed.
3 Select »Network Settings« with »
and confirm with »●«.
– » NETWORK SETTINGS« menu is displayed.
4 Select »Connection« with »
then select »Wireless« with »
5 Select »Connection Type« with »
and then select »Automatic« with »
>
»
«.
6 Select »Select Access Point« with »
»
« and confirm with »●«.
Λ
– » Select Access Point« menu appears and
available wireless networks are scanned
and displayed in the menu
7 Select the network that you want to connect
<
with »
«, »
«, »
V
Λ
»●«.
– W ireless connection password screen is
displayed.
------------------------------------------------------------------------------------------------------------
« or »
V
« or »
V
« or »
« and
V
Λ
<
>
« or »
«.
« or »
V
<
« or
« or
V
>
« or »
« and confirm with
8 Select the required character with »
<
»
« and »
with »●«.
– S elect »ABC« for uppercase and »abc«
for lower case and confirm with »●«.
– S elect »?@123« for numbers and symbols
and confirm with »●«.
– E nter the password, select »Confirm« with
»
«, »
V
Λ
»●«.
Note:
In WEP encryption system, more than one
7
network password can be assigned for the
network. Your television can only connect to
network with level 1 password.
9 Select »Connect« with »
the modem connection.
– T he mesage »Testing ... Please waite«
appears.
10 Press »
network connection is established with the
current settings.
– T he messages »Testing ... Please waite«
appears, after successfull announcement
«
Λ
the messages »Connecting To Gateway:
Successful« and then the MAC address.
«
Λ
11 Press »i« to end the setting.
Note:
If you do not have a dynamic network,
7
follow the instructions in manual connection
section.
«
Λ
>
« and move to the next character
<
>
«, »
« or »
« and confirm with
« (red) to establish
« (green) to make sure that the
ENGLISH
«, »
«,
V
Λ
29
Advertisement
Table of Contents
