Table of Contents
Advertisement
Volume and Sound Settings
Volume
Use the r
t buttons to adjust the
VOLUME
desired volume level.
The display indicates:
"VOL 00" ... "VOL 46".
Sound
For each of the FADER, LOUD, BASS,
TREBLE, and BALANCE settings applies:
1. Select the desired function by briefly
¢ ¢
pressing the
button once or
SOUND
several times.
2. Adjust the desired sound by pressing the
r
t buttons,
VOLUME
or
select the basic setting: press the
button until the signal sounds.
3. Terminate a setting: repeatedly press the
¢ ¢
button until the station selected is
SOUND
displayed again.
After approximately 10 seconds, the con-
trol level with the current settings is left
automatically.
Example: Bass
Repeatedly and briefly press the
button until the display indicates:
Press the r
VOLUME
bass tones are to your taste.
If you wish to instantly recover the default
setting:
¢ ¢
Press the
SOUND
sounds.
r
t
VOLUME
buttons
¢ ¢
SOUND
¢ ¢
button
SOUND
LOUD (Loudness)
The loudness function improves the sound
quality at low volume.
The function can be switched on and off from
the basic setting.
¢ ¢
SOUND
t buttons until the
button until the signal
6
¢ ¢
Press the
button until two sound sig-
SOUND
nals are heard. The display indicates
"LOUD ON" or "LOUD oFF".
FAD (Fader)
The fader function is used to alter the balance
between the front ("F") and rear ("R") loud-
speaker groups.
BAL (Balance)
The balance function is used to alter the
balance between the left ("L") and right ("R")
loudspeakers.
Hide quick links:
Advertisement
Table of Contents
