Table of Contents
Advertisement
Radio
– Repeatedly press the r
TUNING
buttons until the desired programme type
is displayed.
Press one of the r
t buttons
TUNING
until the signal sounds.
The PTY search runs to the next station
broadcasting the selected programme type,
e.g. " POP ", which then is displayed.
If no station is offering the selected pro-
gramme type, you will hear the station
last tuned to and the PTY function is
deactivated.
3. Deactivating the PTY function
This is done by briefly pressing the
button or automatically after approximately
10 seconds.
PTY button
Assigning the PTY programme buttons
t
The station buttons
are assigned at the factory to the programme
types
¢ ¢
¢ ¢
1 NEWS,
2 SPORT,
¢ ¢
4 CLASSICS.
You can assign each of these station buttons
to a programme type of your choice.
1. Activate the PTY function:
¢ ¢
Press the
PTY
sounds. The display briefly shows "PTY"
and the selected programme type, e.g.
"NEWS".
¢ ¢
PTY
2. Repeatedly press the r
buttons until the desired programme type
is displayed.
3. Press the desired station button, e.g.
until the signal sounds.
¢ ¢
3 POP and
button until the signal
t
TUNING
¢ ¢
1,
Station buttons
¢ ¢
¢ ¢
1 ...
4
11
CD or DAT Mode
Connecting a CD or DAT player
CD = Compact Disc (without CD changer)
DAT = Digital Audio Tape
If you have not connected a GRUNDIG CD
changer, you can connect another CD or DAT
player via a GRUNDIG CDP adapter to the car
radio.
Activating the CD or DAT mode
(AUX mode)
Repeatedly and briefly press the
button until "AUX" is displayed.
Operation of the connected units is directly
controlled on the units themselves. Please
observe the technical data and the opera-
ting instructions of the units used.
The maximum output voltage is not
allowed to exceed 2 V
.
rms
CD play is interrupted during traffic
announcements.
To abort a traffic announcement, briefly press
¢ ¢
the
button.
TP
GB
¢ ¢
CD/TAPE
Hide quick links:
Advertisement
Table of Contents
