Hard Drive Installation - Q-See QS434 User Manual

DVR INSTALLATION
Model #: QS434

2.4 HARD DRIVE INSTALLATION

Caution:
When working with devices such as hard drives or DVRs that are sensitive to static electricity, make sure you use a
static-free workstation. Any electrostatic energy coming in contact with the hard drive or DVR can damage it
permanently.
Please install the hard drive following these steps:
1）Open the cover of the DVR and you will see 4 screw holes as shown below:
2）Connect HDD cables as shown below:
3）Attach HDD to base of DVR as indicated below with the screws provided.
4）After installing HDD into DVR close cover.
Notice: New installed HDD needs to be formatted before recording.
5 | P a g e