Device Operation; Mouse Operation - Q-See QS434 User Manual

DEVICE OPERATION

3. DEVICE OPERATION

3.1 MOUSE OPERATION

The mouse is the primary input device for navigating system menus.
NOTE: Unless otherwise noted, all system functions described in this manual are achieved through mouse input.
To use a mouse with the system:
1) Connect a USB mouse to the USB MOUSE port on front panel of the DVR.
NOTE: Only the top USB port on the front panel is designed for data backup to a USB flash drive. Do not connect
a USB flash drive to the bottom USB port on the front panel; it is only used by a USB mouse.
2) Use the mouse buttons to perform the following:
• Left-Button: Click to select a menu option;
during live viewing in split-screen, double-click
on a channel to view the selected channel in
full-screen.; double-click the channel again to
return to split-screen view
• Right-Button: Click to open the Sub-Menu
• Scroll-Wheel: No function.
In device operation, the enter key on remote control has the same function as left click of the mouse.
Figure 3.1.1 Connect a USB mouse to the bottom USB port on the front panel
Fig 3.1.2 Mouse button operation
6 | P a g e
Model #: QS434