Setup For Unix - Axis 5400 User Manual

AXIS 5400/AXIS 5600 User's Guide

Setup for UNIX

Before you start:
To establish communication with the TCP/IP network, you must assign an IP address to your AXIS
5400/AXIS 5600 Print Server. Refer to Assigning an IP Address, on page 8.
Having performed the basic TCP/IP setup procedures, you are now able to print in
interactive mode using FTP or Reverse Telnet protocols. However, if you want to
integrate the AXIS 5400/AXIS 5600 into your host spooler, you can use the Axis
automatic installation script axinstall. This utility software is resident on the AXIS
5400/AXIS 5600 and can be downloaded to your host using FTP. It can also be
downloaded from the software\prt_srv\utility\axinstall\latest folder on the AXIS
Online CD and from the Axis WWW home page at http://www.axis.com/.
Follow the procedure below to download axinstall to your host using FTP:
1. Log in to the AXIS 5400/AXIS 5600 by typing:
ftp <host name>
2. Enter
3. Download the axinstall utility by typing:
get axinstall
Follow the procedure below to install the AXIS 5400/AXIS 5600 using the axinstall
script:
1. Type the command:
sh axinstall
2. Follow the instructions that appear when the script is started.
When the AXIS 5400/AXIS 5600 is installed, it will appear as it is directly connected
to the host printer spooler.
or
ftp <IP address>
as the user id and
root
in the UNIX shell window.
in the UNIX shell window.
as the password.
pass
Setup for UNIX
21