Netware Using Ndps Over Ipx - Axis 5400 User Manual

AXIS 5400/AXIS 5600 User's Guide

NetWare Using NDPS over IPX

Installing the AXIS 5400/AXIS 5600 as a Public Access printer:
1. Make sure that the NDPS Gateway is configured to automatically create a public
access printer.
2. Connect the AXIS 5400/AXIS 5600 to the NetWare network, if it is not already
connected. Refer to Connecting the printer to the Ethernet Network, on page 7 for
more information.
3. Use the AXIS NetPilot to set the HP_JETADMIN parameter of the AXIS
5400/AXIS 5600 to Yes. The HP_JETADMIN parameter must be set to enable
communication between the AXIS 5400/AXIS 5600 and the NDPS Gateway.
Please refer to Using AXIS NetPilot, on page 24.
Please refer to the appropriate Novell documentation for instructions on creating
NDPS Manager objects and the NDPS printers.
Notes
You can also set the HP_JETADMIN parameter of the of the AXIS 5400/AXIS 5600 to Yes via any
standard web browser. Please refer to Using any standard Web browser, on page 23.
The Public Access print servers are immediately available for everyone on the network.
The Axis Gateway will appear in NetWare 5.1 and later releases. To use the Axis Gateway with
earlier versions of NetWare, you can download the Axis Gateway Configuration utility from
www.axis.com.
To print using TCP/IP, Axis print server firmware 6.1 or later is required. In order to print using
IPX/SPX, Axis print server firmware 5.51 or later is needed.
Setup for NetWare
11