Setup For Windows 3.1 & Wfw; Tcp/Ip Printing; Netbios/Netbeui Printing - Axis 5400 User Manual

Setup for Windows 3.1 & WfW
16
Setup for Windows 3.1 & WfW

TCP/IP Printing

To enable TCP/IP printing in Windows 3.1 and Windows for Workgroups
environments, it is recommended that you use a shareware LPR spooler that can be
downloaded from ftp://ftp.axis.com/pub/axis/software/prt_srv/utility/wlprs/.

NetBIOS/NetBEUI Printing

AXIS Print Utility for Windows is the preferred tool for NetBIOS/NetBEUI printing
in Windows 3.1 and Windows for Workgroups environments.
Install the AXIS Print Utility for Windows software, if you have not already done so.
It can be downloaded from the software\prt_srv\utility\axpuw\1.04 folder on the
AXIS Online CD and from the Axis WWW home page at http://www.axis.com/.
Peer-to-peer printing -
networks and requires that all users install the AXIS Print Utility for Windows on
their workstations. Follow these steps to install your AXIS 5400/AXIS 5600 for
peer-to-peer printing at a Windows for Workgroups or Windows 3.1 workstation:
1. Double-click the AXIS Print Utility icon.
2. In the Port menu, click Add. In the NPS Port list, select the AXIS 5400/AXIS
5600 port to be installed. The ports appear as <name>.LP1, <name>.LP2,
and <name>.CM1, where <name> is either AX followed by the last six digits of
the AXIS 5400/AXIS 5600 serial number or a name you have previously given
the AXIS 5400/AXIS 5600, for example AX100B35.LP1 or DevDept.LP1.
Note:
LP2 and CM1 are not available for the AXIS 5400.
3. Accept or change the suggested Windows port name, and type any comments in
the Description field. Make a note of the Windows port name as you will need
this later. Click OK to install the Windows port.
4. In the Port menu, click Connect to bring up the Windows Printers dialog.
5. Select a printer driver from the list of Installed Printers, or click Add>> to install
a new driver. Click Connect...
6. Select the Windows port name, defined in step 3, from the Ports list.
7. Click OK to close the Connect dialog, and Close to close Printers.
This print method is recommended for smaller
AXIS 5400/AXIS 5600 User's Guide