Select\Store\Ld - Comtech EF Data CIM-550 Installation And Operation Manual

Ip-enabled satellite modem
Hide thumbs Also See for CIM-550:
Table of Contents

Advertisement

CiM-550 IP Enabled Satellite Modem
Front Panel Menus

4.1.8 SELECT\STORE\LD

STORE/LOAD CONFIG:
STORE LOAD (PRESS ENTER)
4.1.8.1 SELECT\STORE/LD\STORE
STORE CONFIGURATION TO
LOCATION:
YOUR CONFIGURATION HAS
BEEN STORED!
WARNING!LOC 10 CONTAINS DATA!
OVERWRITE? NO
4.1.8.2 SELECT\STORE/LD\LOAD
LOAD CONFIGURATION FROM
LOCATION:
THE NEW CONFIGURATION
HAS BEEN LOADED
DISPLAY
DISPLAY
10
(ENTER)
(ENTER)
YES
DISPLAY
10
(ENTER)
(ENTER)
SELECTIONS/DESCRIPTION
STORE
LOAD
These sub-menus permit the user to store or load
up to 10 different modem configurations in the non-
volatile memory of the modem
SELECTIONS/DESCRIPTION
Select the location to store the current configuration
to, using the UP/DOWN arrow keys, then press
ENTER. Locations 1 through 10 are available.
If the selected location does not contain a previously
stored configuration, the following screen is
displayed:
If, however, the selected location contains a
previously stored configuration, the following screen
is displayed:
Selecting YES will overwrite the existing
configuration at the selected location.
SELECTIONS/DESCRIPTION
Select the location to load a configuration from,
using the UP/DOWN arrow keys, then press
ENTER. Locations 1 through 10 are available.
If the selected location contains valid data, the
following screen will be displayed:
If, however, the selected location does not contain
valid data, the following screen will be displayed:
52
Rev. 2
CD/CIM550.IOM

Advertisement

Table of Contents
loading

Table of Contents