Table of Contents
Advertisement
CiM-550 IP Enabled Satellite Modem
CLI and Telnet Interface
11.2.7 O
PERATIONS AND
The Operations and Maintenance page is activated from the Main Menu page.
The Operations and Maintenance page contains the following options/fields:
Menu Options/Fields
Status
Unit Information
Boot Image
PARAM Image
FPGA Image
M
P
AINTENANCE
AGE
Entry
Description
A
Displays status information
I
Displays unit information
B
Determines which version of the CiM firmware will be
loaded upon boot-up. The possible options are:
0. Latest - boot the newest file based upon date.
1. Image1 - boot the firmware loaded into the first slot
in permanent storage
2. Image2 - boot the firmware loaded into the second
slot in permanent storage
C
Change name to PARAM file. This is the only one
currently supported. Determines which PARAM file will
be loaded on bootup. The options are:
0. Latest - uses the newest file based on date
1. Image1 - uses the file loaded into the first slot of
permanent storage.
2. Image2 - uses the second file loaded into the second
slot of permanent storage.
3. Factory - uses the internal, hard-coded factory
default parameters.
F
Determines which version of the CiM FPGA firmware
will be loaded upon boot-up. The possible options are:
0. Latest - boot the newest file based upon date
1. Image1 - boot the firmware loaded into the first slot
161
Rev. 2
CD/CIM550.IOM
Advertisement
Table of Contents
