Selecting The Video Output - Grundig GDP 1750 User Manual

16
INITIAL SETUP

Selecting the video output

(EURO AV/RGB, S-Video or components)
The video output of your DVD player was set at the factory to
»RGB«.
If you connect up your DVD player to the television or projector
with a Y/C cable
you must set the video output so that the video signal, and therefore
the picture, reaches the television.
1 Press »i« to open the main menu.
2 Select »Picture« by pressing »
pressing »OK« or »
3 Select »Video Output« by pressing »
vate by pressing »OK«.
4
Select the video output by pressing »
»OK« to confirm.
– »S-Video« for
✓
»RGB« for
5 Press »i« to close the menu.
Selecting the TV format for your television
This setting depends on your television.
If you have a 4:3 format television, select the »4:3« setting.
If you have a 16:9 format television, select the »16:9« setting.
1 Press »i« to open the main menu.
2 Select »Picture« by pressing »
pressing »OK« or »
✓
3 Select »TV Format« by pressing »
pressing »OK«.
4 Select your picture format (»4:3 or »16:9«) using »
A
»
5 Press »i« to close the menu.
______________________________________
(»S-VIDEO
s
«.
»S-VIDEO
©
»EURO AV
s
«.
« and press »OK« to confirm.
OUT« socket on the DVD player),
S A
« or » « and activate by
S A
« or »
S A
« or »
OUT« socket;
TV«;
S A
« or » « and activate by
S A
« or » « and activate by
« and acti-
« and press
S
« or