Connection And Preparation; Connecting The Television - Grundig GDP 1750 User Manual

CONNECTION/PREPARATION
Note:
Do not connect any other equipment while the device is swit-
ched on. Switch off the other equipment as well before con-
necting it.
Only plug the device into the mains socket after you have con-
nected the external devices.

Connecting the television

You have three options, depending on the sockets you have on
your television:
– For the best picture quality, connect the EURO-AV socket using a
fully assigned EURO-AV (SCART) cable.
– The standard connection for many devices, and one which pro-
vides good quality, is via the S-VIDEO OUT socket and the
AUDIO OUT RCA sockets.
– The simplest option which still offers sufficient quality is to connect
the VIDEO OUT socket and AUDIO OUT sockets using RCA ca-
bles.
Required adjustments to the television
After connecting up to the output sockets, they must be activated.
The setting procedure is described in the section "Selecting the
video output (EURO AV/RGB or S-video)" on page 16.
If the DVD player is connected to a television with a 16:9 screen
format, follow the setting procedures in the "Selecting the televi-
sion screen format" section on page 17.
The colour standard of the DVD player must be matched to the co-
lour standard of your television. The setting procedure is described
in the section "Setting the TV system (TV norm)" on page 15.
Connect the socket
and not indirectly via a video recorder. This can cause difficulties
when playing back copy-protected CDs.
©
»EURO AV TV« directly to the television,
__________
11