Connecting A Digital Multi-Channel Amplifier Or Digital Two Channel Audio - Grundig GDP 1750 User Manual

CONNECTION/PREPARATION
Connecting a digital multi-channel amplifier or
digital two-channel audio system
The digital multi-channel sound of a DVD can best be decoded and
played back with a multi-channel audio/video amplifier (Dolby*
digital decoder or DTS**).
1 Plug a standard RCA cable into the
of the DVD player and into the corresponding socket on the
digital multi-channel amplifier;
or
remove the protective cap of the optical digital output and plug
an optical digital cable into the
cket of the DVD player and into the corresponding socket of
the digital multi-channel amplifier.
Notes:
Keep the protective cap in a safe place and replace it on the
device if it is not to be used for a longer period of time.
Even if you are using a digital connection, you should still make
an analogue audio connection as it is possible, depending on
the disc type, that the signal cannot be output via the
TAL AUDIO
* Manufactured under licence from Dolby Laboratories Licensing Corporation.
"Dolby", "Dolby Pro Logic", "Dolby Digital" and the double-D symbol "
are trademarks of the Dolby Laboratories Licensing Corporation. Copyright
1992 Dolby Laboratories, Inc. All rights reserved.
** DTS and DTS Digital Out are trademarks of Digital Theater Systems, Inc. All
rights reserved.
Optional
»DIGITAL AUDIO
»DIGITAL AUDIO
OUT« socket (see page 14 for connection).
__________
OUT«
OUT« so-
»DIGI-
g
"
13