Table of Contents
Advertisement
14
CONNECTION/PREPARATION
Connecting an audio system with analogue
two-channel stereo sound
1
Plug a standard RCA cable into the
DV D player and in the corresponding socket on the audio
system.
Caution:
Do not connect the
player to the PHONO (record player) input on the audio
system.
Connecting the power cord
1
Plug the power cord supplied into the
on the back of the player.
2
Plug the power cord into the wall socket.
Note:
Only plug the device into the mains socket after you have
connected the external devices.
Inserting batteries in the remote control
1
To open the battery compartment, press the catch and remove
the lid.
2
When inserting the batteries (for example, R06 or AA,
2 x 1.5 V), observe the polarity marked in the battery com-
partment.
3
Close the battery compartment.
Note:
If the DVD player no longer reacts properly to remote control
commands, the batteries may be flat. Always remove used bat-
teries. The manufacturer accepts no liability for damage cau-
sed by leaking batteries.
Environmental note:
Batteries, including those which do not contain heavy metal,
should not be disposed of with household waste. Always
dispose of used batteries in accordance with local environ-
mental regulations.
»R AUDIO OUT
»R AUDIO OUT
L« socket on the DVD
»100-240V ~
__________
L« on the
« socket
Advertisement
Table of Contents
