Connecting An Audio System With Analogue Two-Channel Stereo Sound; Connecting The Power Cord; Inserting Batteries In The Remote Control - Grundig GDP 1100 User Manual

CONNECTION AND PREPARATION
EURO
R AUDIO OUT L DIGITAL AUDIO OUT
VIDEO OUT
S VIDEO OUT
~
110-240 V
50/60 Hz 10 W
Connecting an audio system with analogue
two-channel stereo sound
As an alternative to using the television's speakers, the sound can also be
played back through an audio system. This can improve audio playback.
R L
AUDIO
INPUT
1
Plug a standard cinch cable into the
player and into the corresponding socket on the audio system.
Caution:
Do not connect the
PHONO (record player) input socket on the audio system.

Connecting the power cord

1
Plug the power cord into the wall socket.

Inserting batteries in the remote control

1
Open the battery compartment by pressing the snap-catch, and remove
the lid.
2
When inserting the batteries (Micro type, e.g. R03/AAA, 2 x 1.5 V), observe
the polarity marked on the battery compartment.
3
Close the battery compartment.
Note:
If the DVD player no longer reacts properly to remote control commands, the
batteries may be flat. Be sure to remove used batteries. The manufacturer
accepts no liability for damage resulting from leaking batteries.
Environmental note:
Batteries, including those which contain no heavy metal, may not be dis-
posed of with household waste. Please dispose of used batteries in an envi-
ronmentally sound manner. Find out about the legal regulations which apply
in your area.
EURO AV TV
R AUDIO OUT L DIGITAL AUDIO OUT
VIDEO OUT
S VIDEO OUT
»R AUDIO OUT
»R AUDIO OUT
_______________________________________
~
110-240 V
50/60 Hz 10 W
L« socket of the DVD
L« socket on the DVD player to the
13