How To Control Ptz; Method Of Connection; The Method Of Ptz Control Operation - Genie 4CH User Manual

3.8 How to control PTZ

3.8.1 Method of connection

1）connect RS-485 port of speed dome camera with he DVR PTZ port ;
2）connect the video cable of speed dome with the DVR video input jet ;
3）turn on the power of speed dome after connected mention above;

3.8.2 The method of PTZ control operation

1） the current video channel must switch to that channel camera will be controlled in the video channel;
2） finish setting the ID of speed dome;
3） confirm if it is correct or not from the cable A,B of speed dome to the cable A,B of DVR,（please see the details of in chapter II: 2.1.2）
4） process corresponding setting in DVR menu, details setting in 【Main Menu】 【System Setting】
37
【PTZ Setting】.