Video Detection - Genie 4CH User Manual

【Channel】/【Recording Schedule】Drop-down menu, select the corresponding channel Number/Week to set, select "ALL" can set the all channel
【Alarm Recording】Can record 3-5seonds video before the alarm event to occur（the timing depends on the capacity of video streaming）;
【Time Slice】The means the recording mode of that channel currently in some time, "■" anti-display setting normal, alarm recording mode, can
select single or multi in it, four time slice for setting selectable. Under some recording mode and the time in different time slice, you
can duplicate to set, the time setting range is 00:00－24:00, after set the channel parameter, please press the save key to save the
setting in the system.
Shortcut setting
1) Duplicate the same setting from one channel to another channel, for example, select channel one, after recording mode setting, click the copy
icon into the others.
2) User should save the setting one by one after channel setting.

3.6.4 Video Detection

Note:
1) Select【Main Menu】 【System Setting】
2) During motion mode switch, there is not None Area and Sensitivity setting in video loss and video cover detection;
3) When there is a motion detection event in one channel, the symbol of motion detection will show in the channel;
4) No need to use FN function key when you drag the motion detection area by mouse, click the right key of mouse to save the setting before exit, the
user press the SAVE to confirm before exit the Motion Detection menu.
function enable in onetime;
【Video Detection】 to enter the setting menu;
30