Video Loss; Other Alarm; Alarm Out - Genie WHDSDI16 User Manual

Table of Contents

DVR User Manual

4.5.3 Video Loss

Step1: Enter into MenuSetupAlarmVideo Loss tab. Refer to Fig 4-24:

Step2: The setup steps of video loss trigger are similar to alarm handling. You can refer to

Chapter 4.5.1 Sensor alarm handling for more details.

Step3: Click "Apply" button to save the setting; click "Exit" button to exit the current

interface.

Fig 4-24 Video Loss

This tab gives a choice to configure alarm for Disk Full, IP Conflict, the Disconnect

event, Disk Attenuation or Disk Lost.

Step1: Enter into MenuSetupOther alarm tab. Refer to Fig 4-25:

Step 2: Use the dropdown menu and select the event or the alarm.

Step 3: Check the required trigger options.

If the selected event is "Disk Full", then use the drop down box for "Disk Shortage

Alarm" to choose a threshold value for remaining HDD space. If the threshold value

is reached, the system will trigger the Disk Full Alarm.

Click "Apply" to save settings; Click "Exit" to exit the current interface

Fig 4-25 Other Alarm

Alarm out includes three sub menus: alarm out, schedule and buzzer

To setup alarm out:

Step 1: Enter into MenuSetupAlarm out tab. Refer to Fig 4-26. Input relay name and hold time.

Step 2: Select the Schedule tab. This will bring up the schedule setup interface. The setup steps for schedule for alarm out are similar to

Table of Contents