Specifications - Denon DRA-CX3 Operating Instructions Manual

Specifications

n
Receiver section
Rated output: 2-channel driving (CD
75 W + 75 W
150 W + 150 W
High frequency distortion: 0.05 % (Rated output: –3 dB), 8 Ω/ohms, 1 kHz
Output terminals: Speaker 4 ~ 16 Ω/ohms
Suited for headphones/stereo headphones
Equalizer amplifier output (REC OUT terminals):
Rated output :
Input sensitivity / Input impedance:
PHONO (MM) :
PHONO (MC) :
CD, LINE1, LINE2, LINE3 : 130 mV / 47 kΩ/kohms
PHONO (MM) :
RIAA deviation:
PHONO (MC) :
Reception frequency range: FM : 87 .5 MHz ~ 108.0 MHz
Reception sensitivity: FM : 1.5 µV / 75 Ω/ohms
35 dB (1 kHz)
FM channel separation:
FM S/N ratio: Monaural : 74 dB
FM harmonic distortion: Monaural : 0.3 %
n
Properties
PHONO (MM) : 84 dB
S/N ratio:
PHONO (MC) : 70 dB
(A-weighted network) CD, LINE1, LINE2, LINE3 : 95 dB (input terminals short-circuited)
Tone control: BASS : 100 Hz ± 8 dB
TREBLE : 10 kHz ± 8 dB
5 Hz ~ 40 kHz (+0.5 dB, –3 dB) (INPUT: CD, PURE DIRECT: ON)
Frequency response:
n
General
Power outlet: 1 switched outlet, total capacity 100 W (0.43 A)
Power supply: AC 230 V, 50 Hz
105 W
Power consumption:
Standby: 0.5 W or less
Maximum external dimensions:
300 (W) x 80 (H) x 341 (D) mm
5.5 kg
Mass:
SP OUT)
(8 Ω/ohms, DIN, 1 kHz, T.H.D. 0.7 %)
(4 Ω/ohms, DIN, 1 kHz, T.H.D. 0.7 %)
150 mV
2.5 mV / 47 kΩ/kohms
0.2 mV / 100 Ω/ohms
20 Hz ~ 20 kHz ±0.5 dB
30 Hz ~ 20 kHz ±0.5 dB
AM : 522 kHz ~ 1611 kHz
AM : 20 µV
Stereo : 70 dB
Stereo : 0.4 %
(With input terminals short-circuited, 5 mV input signal)
(With input terminals short-circuited, 0.5 mV input signal)
n
Remote control unit (RC-1060)
Remote control method: Infrared pulse method
Batteries: R03/AAA Type (two batteries)
Maximum external dimensions:
44 (W) x 233 (H) x 22 (D) mm
165 g (including batteries)
Mass:
* For purposes of improvement, specifications and design are subject to change without notice.

ENGLISH
ENGLISH