Selecting A Location For The Printer - Lexmark X65X series User Manual

Learning about the printer
1 Automatic Document Feeder (ADF)
2 Printer control panel
3 Standard exit bin
4 Multipurpose feeder
5 550-sheet tray (Tray 1)
6 550-sheet tray (Tray 2)
7 Optional output bin

Selecting a location for the printer

When selecting a location for the printer, leave enough room to open trays, covers, and doors. If you plan to install any
options, leave enough room for them also. It is important to:
•
Make sure airflow in the room meets the latest revision of the ASHRAE 62 standard.
• Provide a flat, sturdy, and stable surface.
• Keep the printer:
–
Away from the direct airflow of air conditioners, heaters, or ventilators
–
Free from direct sunlight, humidity extremes, or temperature fluctuations
–
Clean, dry, and free of dust
•
Allow the following recommended amount of space around the printer for proper ventilation:
1 Right Side 20 cm (8 in.)
2 Left Side 31 cm (12 in.)
3 Front 51 cm (20 in.)
4 Rear 20 cm (8 in.)
5 Top 31 cm (12 in.)
3
2
1
5
4
3
2
1
5
4
11