Setting The Outgoing Fax Name And Number; Setting The Date And Time; Turning Daylight Saving Time On - Lexmark X65X series User Manual

Additional printer setup

Setting the outgoing fax name and number

To have the designated fax name and fax number printed on outgoing faxes:
1
Type the printer IP address into the address field of your Web browser.
Note: If you do not know the IP address of the printer, then print a network setup page and locate the IP
address in the TCP/IP section.
2
Click Settings.
3
Click Fax Settings.
4
Click Analog Fax Setup.
5
Click inside the Station Name box, and then enter the name to be printed on all outgoing faxes.
6
Click inside the Station Number box, and then enter the printer fax number.
7
Click Submit.

Setting the date and time

You can set the date and time so that they are printed on every fax you send. If there is a power failure, then you may
have to reset the date and time. To set the date and time:
1
Type the printer IP address into the address field of your Web browser.
Note: If you do not know the IP address of the printer, then print a network setup page and locate the IP
address in the TCP/IP section.
2
Click Links & Index.
3
Click Set Date and Time.
4
Click inside the Manually Set Date & Time box, and then enter the current date and time.
5
Click Submit.

Turning Daylight Saving Time on

The printer can be set to automatically adjust for Daylight Saving Time (DST):
1
Type the printer IP address into the address field of your Web browser.
Note: If you do not know the IP address of the printer, then print a network setup page and locate the IP
address in the TCP/IP section.
2
Click Links & Index.
3
Click Set Date and Time.
4
Select Automatically Observe DST.
5
Click Submit.
63