Dhcp Server Configuration - Planet IPX-1000 User Manual

Connection Type Date required
Static IP
PPPoE
DHCP client
Please consult your ISP personnel to obtain proper PPPoE /IP
address related information, and input carefully.
i
Hint
If Internet connection cannot be established, please
double-check the parameters configured in IPX-1000 or
contact the ISP service staff for support information.

DHCP Server Configuration

IPX-1000 has a built-in DHCP server that can automatically assign dynamic IP addresses to client PCs
connected to its LAN ports, simplifying the task of IP address management. You can set up two IP
address ranges for the DHCP server to use – the second range will be used only after the first range is
all used up. Being able to set up two IP address ranges makes the system more flexible in terms of IP
address usage.
Please select the DHCP server configuration icon:
DHCP server
Lease Time (min)
IP, Subnet mask, Gateway, IP address of DNSserver
Username, Password
Usually, noon. But some SIP may require a particular Host name, Domain
name, or MAC (physical) address.
Parameter Description
Enabele / Disable
Please make sure all the following parameters are set properly before
enabling the DHCP server.
1440 (default value)
The lease time is measured in minutes.
24