General; Account - Planet DVR-460 User Manual

Press "Alarm", and you will see the following options:
Alarm Trigger
‧
Select to turn the alarm-trigger function on (Enable) or off (Disable).
Alarm Method
‧
Select the notification methods when any alarm is triggered: Email and / or FTP.
a) Email
When this option is checked, MJPEG pictures will be saved in the path assigned in "General"
"Snapshot Path" and a copy will also be emailed to the E-mail address assigned in "Network"
triggered.
b) FTP
When this option is checked, MJPEG pictures will be saved in the path assigned in "General"
"Snapshot Path" and a copy will also be uploaded to the FTP address assigned in "Network"
triggered.
Post Numbers
‧
Set the number of MJPEG pictures (1-10) which will be sent with the chosen alarm method(s).
Alarm Duration
‧
Set the duration time of motion trigger recording (5 SEC / 10 SEC / 20 SEC / 40 SEC).
Auto switch to alarm video
‧
Check this option to immediately switch to the channel that an alarm event is triggered and see the live view.
Alarm Refresh
‧
Press to clear the alarm icon "

7.5.4 General

In "General" and its sub-menus, "Account", "Online User Info" and "File Path", you can view and set up some general
information about this software and your DVR.
Firmware Version
‧
Show the current DVR firmware version information.
Turbo step
‧
To speed up menu selection or the control of the PTZ camera under AP operations, users can activate "Turbo" function
by selecting from the drop-down menu. Users are allowed to change the turbo steps from 1 to 30.
Example: If the value of the turbo step is set to "5", it means that when users press one of the button up/down/left/right,
one click is as clicking 5 times.
Mac address
‧
Show the information of the Mac address.
MAX LOG LIST
‧
Set the maximum number of log list.
Server Log
‧
Press "Server Log" button to enter the server log list window as following. You can filter log types you want to see by
checking or unchecking the log types on the right side.
Title
‧
Name the title which will be shown on the top of the AP live viewer (up to 8 characters).

(1) Account

In "General"
and add / delete / edit user accounts.
‧ To set the maximum user number, key in the number from 1 ~ 5 in "Max User(s)".
‧ To create a new account, press "ADD", and you will see the setting window as the following:
To confirm account creation, press "OK"; to discard the creation, press "EXIT".
" shown on the screen.
"Account", you can view the current user account information, set the maximum user number,
-58-
LICENSED SOFTWARE AP
"File Path"
"Mail" if any alarm is
"File Path"
"FTP" if any alarm is