2. FRONT AND REAR PANELS
2.1 Front Panels
2.1.1 DVR-460
1)
LED Indication
The following LEDs will be on when:
HDD: HDD is reading or recording
HDD Full: HDD is full.
ALARM: Once the alarm is triggered
TIMER: When timer recording is turned on
PLAY: Under playing status
REC: Under recording status
2)
"MENU"
Press "MENU" button to enter the main menu.
3)
"ENTER / SET"
Press "ENTER" button to confirm the setting.
‧
Press "SET" to change the position of the channel display.
Press up/down/left/right direction buttons to select the channel that you want to change.
Press "+" or "-" to select the channel which You would like to show.
Channel Display Position
‧
Under the live mode, you can switch the positions of two channels in the following way:
Step1: Press "Set" to highlight one channel.
Step2: Press "UP", "DOWN", "LEFT", "RIGHT" button to move the highlight to the
channel you want to change its position.
Step3: Press "+" or "-" to select the channel you want to switch its position with the
one selected in Step2.
Step4: Press "ENTER" button to confirm the setting. For example, the position of CH2
& CH4 is switched as shown on the right side.
Under the playback mode, you can select a channel to display the live video instead of the playback video:
Step1: Press "Set" to highlight one channel.
Step2: Press "UP", "DOWN", "LEFT", "RIGHT" button to move the highlight to the
channel you want to view the live video.
Step3: Press "+" or "-" to select the channel you want to view its live video.
Step4: Press "ENTER" button to confirm the setting. For example, CH2 playback view
is replaced with CH4 live view as shown on the right side.
2 3
12.
13.
-4-
FRONT AND REAR PANELS
11.
4 5 6 7 8
10.
1
04
01
02
03
Under Live Mode
04
01
03
04
Under Playback Mode
9