Before operating the DVR, some general configuration should be setup first. The following
subsections will introduce function keys on the front panel and general configuration of the DVR.
The regular displayed OSD information and its displayed positions are shown as following figure.
Title of the channel will be displayed on the top-left corner of the window, either in full screen mode or in
multiple channel mode. The current operating mode, including Call mode, Dome Control mode,
Playback mode, Freeze mode and Sequence mode, will be displayed on the bottom-left corner of the
screen. The date/ time information will be display on the bottom-right corner of the screen.
Ch4
►*1
3.1 Front Panel Introduction
The front panel controls enable users to control the unit and preset the programmable functions.
3.1.1
LED Definition
The LEDs on the front panel of the DVR are described as follows.
Power LED
Network LED
REC LED
Alarm LED
The LED lights up when the correct power is connected to the unit.
The LED lights up when the DVR is connected to a network and
blinks when data is being transferred.
The LED blinks while the DVR is recording.
The LED lights up when an alarm is triggered.
- 15 -
General System Setup
2008/11/09 PM04:31:22
3
Chapter 3