Channel Add/Delete; Clock (Auto); Clock (Manual) - GoVideo VR3930 User Manual

Initial Setup (Continued)

Channel Add/Delete

This feature allows you to manually add or delete chan-
nels from your channel list.
Follow steps 1-3 as shown under Auto Channel
1 1
Set.
Use v / V to select the CH. Add/Del option.
2 2
Press B to move to the third level.
3 3
The Edit icon is highlighted.
Press ENTER.
4 4
The Channel Edit menu appears.
Ch. 2
0-9 Input
Use v / V or 0-9 to select a channel to add or
5 5
delete then press ENTER.
The Add or Delete icon is highlighted.
Press ENTER to confirm your setting.
6 6
Repeat steps 5-6 to add or delete additional
7 7
channels.

Clock (Auto)

The DVD Recorder+VCR gives you two ways to set the
time and date: Auto or Manual. Auto is the default setting
and enables the DVD Recorder+VCR to set the clock
whenever the DVD Recorder+VCR is off or in Standby
mode.
Tuning Band
Auto Channel Set
CH. Add/Del
Clock
TV Aspect Ratio
Progressive Scan
Factory Setting
Press SETUP.
1 1
The Setup menu appears.
Use v / V to select the General option.
2 2
While the General option is selected, press B to
3 3
move to the second level.
Use v / V to select the Clock option.
4 4
Press B to move to the third level.
5 5
Add
Delete
Return
Auto
Manual
Time Zone Auto
Daylight
Auto
Savings
Prev. Select
Use v / V to select the Auto option then press
6 6
ENTER.
The Auto option is set at the factory. In the Auto option,
the DVD Recorder+VCR looks for a channel carrying XDS
(Extended Data Services) information. XDS updates the
clock using the Coordinated Universal Time.
Use v / V to choose your Time Zone.
7 7
You can set your local Time Zone manually. When Time
Zone is set to Auto, the DVD Recorder+VCR will use XDS
information to determine the proper setting.
Use B to choose the Daylight Saving option.
8 8
Use v / V to choose Auto, On, or Off.
You can turn Daylight Savings On or Off manually. When
set to Auto, the DVD Recorder+VCR will use XDS infor-
mation to determine the proper setting.
Press ENTER to confirm your setting, then
9 9
press SETUP to exit the Setup menu.
ote
If your local TV station does not send date and time informa-
tion, or sends incorrect information, you can set the clock man-
ually.

Clock (Manual)

Follow steps 1-5 as shown under Clock (Auto).
1 1
Use v / V to select the Manual option then
2 2
press ENTER.
Tuning Band
Auto Channel Set
CH. Add/Del
Clock
TV Aspect Ratio
Progressive Scan
Factory Setting
Enter the necessary information for date and
3 3
time.
b / B (left/right): Moves the cursor to the previous
or next column.
v / V (up/down): Changes the setting at the current
cursor position.
Press ENTER to confirm your setting, then
4 4
press SETUP to exit the Setup menu.
Auto
Manual
Year 2003
Date /
1 1
Time :
12 00 AM
Select
19