The Vcr Setup Menu; Channel Selection - GoVideo HT2010 User Manual

VCR Setup (Continued)

The VCR Setup Menu

1 1
Press MENU to display the MAIN menu.
2 2
Press v v /V V to display the VCR SETUP menu,
then press SELECT/ENTER.
The VCR SETUP menu will appear.
SET CLOCK
TIMER RECORD
CHANNEL SETUP
VCR SETUP
SELECT ENTER
TO EXIT PRESS
3 3
Press v v /V V to choose the desired option on the
VCR SETUP menu. Then press b b /B B to choose
the desired setting.
SCREEN DISPLAY
The DVD+VCR on-screen displays can be turned on or off.
Press b/B to switch SCREEN DISPLAY between ON and
OFF.
LANGUAGE
The DVD+VCR on-screen menus can be displayed in English,
Spanish, or French.
Press b/B to switch LANGUAGE among ENGLISH, SPAN-
ISH and FRENCH.
AUDIO MODE
The DVD+VCR has two separate audio playback systems: 1)
High-quality VHS Hi-Fi system; and 2) Standard NORMAL
mono system. The same audio is generally recorded on both
systems. The VHS Hi-Fi system plays on separate (left and
right) channels, and the NORMAL system plays monaural
sound. The normal track is always played so the cassette can
be played on a DVD+VCR that does not have VHS Hi-Fi.
Press b/B to switch AUDIO MODE between HI-FI and
NORMAL .
BROADCAST TYPE (STEREO/SAP/MONO)
Multi-channel Television Sound (MTS) carries stereo and/or
Second Audio Program (SAP) audio signals. You only need to set
BROADCAST TYPE when both MTS stereo and SAP signals are
received. When only one of these MTS signals is received, the
DVD+VCR will automatically select the corresponding receiving
mode (Stereo or SAP) regardless of the selected position. For nor-
mal operation, the display should be in the STEREO position. The
DVD+VCR will then record a STEREO program when available, and
only record a MONO program if the program is not in stereo. For
weak STEREO and/or SAP broadcasts, changing the display
to MONO may give clearer sound.
Press b/B to switch BROADCAST TYPE among STEREO,
SAP, and MONO.
AUDIO OUTPUT (STEREO/LEFT/RIGHT)
Used during playback [when AUDIO MODE (HI-FI/NORMAL) is
in HI-FI position] for selecting the audio output signals from the
AUDIO OUT terminals (L ch and R ch), and RF.OUT.
This display setting should normally be left in the stereo posi-
tion, so that when a stereo tape is played, the stereo sound will
be heard through the left and right channels. If a mono tape is
played and the audio output is set to stereo, the same mono
sound will be heard from both left and right channels.
Press b/B to switch AUDIO OUTPUT among STEREO,
LEFT, and RIGHT.
20
SCREEN DISPLAY: ON
LANGUAGE:
AUDIO MODE:
BROADCAST TYPE:
AUDIO OUTPUT:
SELECT ADJUST
TO EXIT PRESS

Channel Selection

The DVD+VCR is equipped with a frequency
synthesized tuner capable of receiving up to 181
channels. These include VHF channels 2-13, UHF
channels 14-69 and CATV channels 1-125.
Before you begin:
Connect the DVD+VCR to the desired type of antenna or
cable TV system, as shown on page 11.
AUTO CHANNEL PROGRAMMING
1 1
Press MENU to display the MAIN menu.
2 2
Press v v /V V to select the CHANNEL SETUP menu,
then press SELECT/ENTER.
The CHANNEL SETUP menu will appear.
SET CLOCK
TIMER RECORD
CHANNEL SETUP
VCR SETUP
SELECT ENTER
TO EXIT PRESS
3 3
Press V V to choose the INPUT SELECT option,
then press b b /B B to select TUNER.
Press b/B repeatedly to switch among TUNER, LINE1
and LINE2.
4 4
Press v v /V V to choose the AUTO CHANNEL SEARCH
option, then press b b /B B to find channels.
The tuner will automatically cycle through all
available channels in the area and place them in
the tuner's memory.
5 5
After AUTO CHANNEL SEARCH is complete,
make sure the CHANNEL SOURCE is set appro-
priately in the CHANNEL SETUP menu. Press
v v /V V to choose CHANNEL SOURCE, then press
b b /B B to select TV or CATV.
Remember, TV is for the over-the-air antenna
reception, and CATV is for cable or wireless cable
connection.
6 6
Press MENU to return to the TV screen.
7 7
Use CH/TRK (v v /V V ) or CHANNEL (v v /V V ) on the
front panel to cycle the DVD+VCR through the
channels in memory.
TO ADD OR ERASE CHANNELS FROM MEMORY
This feature allows you to add or erase channels from
memory manually.
1 Press V V to choose the ADD/DEL CH option on the
CHANNEL SETUP menu. Press b/B to select a
channel to add or erase.
2 Press SELECT/ENTER to add or erase the channel.
Repeat steps 1 and 2 to add or erase channels.
3 Press MENU to return to the TV screen.
AUTO CHANNEL SEARCH
CHANNEL SOURCE:
ADD/DEL CH:
INPUT SELECT: