Dv Record Audio; Auto Chapter; Disc Settings; Disc Initialize - GoVideo VR3930 User Manual

Initial Setup (Continued)

DV Record Audio

You only need to set DV Record Audio if you have a
digital camcorder with 32kHz/12-bit sound connected to
the front panel DV IN jack. Some digital camcorders
have two stereo tracks for audio. One is recorded at the
time of shooting; the other is for overdubbing after
shooting.
• With the Audio 1 setting, the sound that was record-
ed while shooting is used.
• With the Audio 2 setting, the overdubbed sound is
used.
DISC Record Mode
VCR Record Mode
DV Record Audio

Auto Chapter

Auto Chapter
During recording (Video mode only), chapter markers
are added automatically at fixed intervals. You can set
this interval to 3 minutes, 5 minutes or 10 minutes. To
turn off automatic chapter marking, select "Not Use".
DISC Record Mode
VCR Record Mode
DV Record Audio
Auto Chapter
24

DISC Settings

DISC Initialize

• If you load a blank DVD-R disc, it will always be ini-
• If you load a blank DVD-RW disc, you will be prompt-
• If you load a DVD-RW that has already been used,
Audio 1
Audio 2
Prev. Select
1 1
2 2
3 3
4 4
5 5
Not Use
3 Min
6 6
5 Min
10 Min
Prev. Select
7 7
If you change the disc format, everything recorded
on the disc will be erased.
8 8
tialized in Video mode, which allows the disc to be
played in most standard DVD players.
ed to initialize the disc in Video mode (for maximum
compatibility) or VR mode (to enable advanced edit-
ing features).
you can change between Video mode and VR mode
by erasing the disc using the DISC Initialize feature.
DISC Initialize
DISC Finalize
DISC Name
DISC Protect
EZ Play
My DVD
Press SETUP.
The Setup menu appears.
Use v / V to select the Disc option.
While the Disc option is selected, press B to
move to the second level.
Use v / V to select the DISC Initialize option.
Press B to move to the third level.
The Start icon is highlighted.
Press ENTER.
The DISC Initialize menu appears.
Disc Initialize
Select mode.
VR Mode
Use b / B to select the desired DISC Initialize
Mode (VR Mode or Video Mode) then press
ENTER.
It may take a few minutes to initialize the disc.
Caution
Press SETUP to exit the menu.
Start
Prev. Select
Video Mode