Channel Settings; Auto Channel Search; Add/Remove Channels - GoVideo DV2150 User Manual

Channel Settings

Auto Channel Search

Automatically searches for all available TV
stations from antenna or cable TV. If you
are using a cable box or satellite receiver,
you do not need to run Auto Channel
Search.
1
Press VCR, then press SETUP.
2
Select Channel Set > Auto Channel
Search.
3
Choose from the following:
Cable TV - Select if the DVD+VCR is
connected to a cable TV source.
Antenna - Select if the DVD+VCR is
connected to an antenna.
Detect Automatically - Select to
have the DVD+VCR detect your signal
source automatically.
4
The DVD+VCR searches for all avail-
able stations.This may take several
minutes to complete.
5
When finished, the DVD+VCR tunes to
the lowest channel found.

Add/Remove Channels

Allows you to manually add or remove
channels.
1
Press VCR, then press SETUP.
2
Select Channel Set > Add/Remove
Channels.
3
Add or remove channels:
• Use  to select the desired chan-
nel.
• Press  to add or  to remove the
channel.
4
When finished, press SETUP to exit.
23
3 - Setup