Save / Reload Settings; Password Setup - Planet ATA-150 User Manual

Save / Reload Settings

This page allows you save current settings to a file or reload the settings from the file which was saved
previously. Besides, you could reset the current configuration to factory default.
Save Settings to File
Load Settings from File
Reset Settings to Default

Password Setup

This page is used to set the account to access the web server of ATA. Empty user name and password
will disable the protection.
User Name
New Password
Confirmed Password
Save current settings to a file.
Browse a file and upload to reload settings.
Press Reset will clean all current configurations and return to
default values.
Enter user name.
Input password for this user.
Confirm password again.
- 40 -