Table of Contents
Advertisement
Save/Restore
All settings can be saving to a local file. Or, you can upload a local file to restore as the device
configuration for the Telephony WATA.
Factory Default
This function is used to restore all the parameters back to factory default setting. You can use the Save
/ Restore Setting (please refer to the section of "Save / Restore") to check the factory default
configuration, after you click on the Set button.
Firmware Update
You can upgrade the firmware of the device using this tool. Make sure that the firmware you want to use
is saved on the local hard drive of your computer. Click on Browse to search the local hard drive for the
firmware to be used for the update. Upgrading the firmware will not change any of your system settings
but it is recommended that you save your system settings before doing a firmware upgrade.
Firmware Name：Select that you want to upgrade Firmware version.
64
Advertisement
Table of Contents
