Tone - Planet ATA-150 User Manual

Reverse Polarity before Caller
ID
Short Ring before Caller ID
Dual Tone before Caller ID
Caller ID Prior First Ring
Caller ID DTMF Start Digit
Caller ID DTMF End Digit
Flash Time Setting
[ Space:10, Min:30, Max:2000 ] Default : 200 ~ 500
Speaker Voice Gain
[ -32~31 ],Mute:-32
Mic Voice Gain
[ -32~31 ],Mute:-32

Tone

User can adjust the items of the "Call Control" when in VoIP communication. And, basically system
will use the following default setting values if user does not want to change them.
- Select Country
Country
Check to send reverse polarity before caller ID.
Default : Disable
Check to send short ring before caller ID.
Default : Disable
Check to send dual tone before caller ID.
Default : Disable
Check to send caller ID before first ring.
Default : Enable
Set caller ID DTMF start digit.
Default : DTMF_A
Set caller ID DTMF end digit.
Default : DTMF_C
(ms)
Set Minimum and Maximum Flash time.
(dB)
Set Speaker voice volume.
Default : 0
(dB)
Set microphone voice gain volume.
Default : 0
User can select country to specify tone parameters (Dial Tone,
Ring Tone, Busy Tone, and Waiting Tone). If user wants to set
tone manually, please select CUSTOMER. After selecting
CUSTOMER, user can assign Custom 1 to 8 for each tone.
Default : TAIWAN
- 30 -