Planet ATA-150 User Manual page 20

PPTP
Mode
IP Address
Subnet Mask
Gateway
Server IP Address
User Name
Password
Please be noticed that the Utility Tool is only designed
Note
for the LAN environment setting. If the "Connect Type" is
"PPPoE", the Utility Tool can NOT find the device.
Set LAN interface as PPTP mode.
Set IP type if Dynamic IP or Static IP at PPTP connection.
Default : Dynamic IP
LAN IP Address of the ATA at Static IP type.
Default : 0.0.0.0
LAN Mask of the ATA at Static IP type.
Default : 0.0.0.0
Gateway of the ATA
Default : 0.0.0.0
Set PPTP Server IP address.
Default : 0.0.0.0
Set user name of PPTP connection
Default : Null
Set password of PPTP connection
Default : Null
- 20 -