Planet ATA-150 User Manual page 9

LED Display of ATA-150
PWR
LNK/ACT
Phone
LED Display of ATA-150S
PWR
LNK/ACT
RING1
RING2
1. The default IP is http://192.168.0.1. Press RESET button
Note
2. Using the power supply that is not the one included in
3. Switching type AC Adapter is required for normal
Power is supplied to the device.
OFF: the device is disconnected to LAN.
ON: the device is connected to LAN.
OFF: the phone is idle.
ON: the phone is in use (off-hook).
Blinking: the phone is ringing.
Power is supplied to the device.
OFF: the device is disconnected to LAN.
ON: the device is connected to LAN.
OFF: the phone is idle.
ON: the phone is in use (off-hook).
Blinking: the phone is ringing.
OFF: the phone is idle.
ON: the phone is in use (off-hook).
Blinking: the phone is ringing.
on rear panel over 5 seconds will reset the VoIP Phone
Adapter to factory default value. (Except speed dial and
call forward settings)
package may cause device damage and void the warranty
for this product.
operating, use of Linear type AC adapter may cause device
malfunciton.
- 9 -