Replacing Front Parking Lamp/Turn Signal/Side Marker Bulbs; Replacing Front Clearance And Identification Lamp Bulbs - Ford F-750 Owner's Manual

Lights

Replacing front parking lamp/turn signal/side marker bulbs

To remove the parking lamp/turn signal bulbs:
1. Make sure the headlamp control is in the position and the turn
signals are off.
2. Remove the four screws from the
lamp assembly.
3. Carefully lower the lamp assembly
and pull the bulb socket straight out
of the lamp assembly.
4. Carefully pull the bulb straight
out of the socket and push in the
new bulb.
5. To complete installation, follow
the removal procedure in reverse order.

Replacing front clearance and identification lamp bulbs

To change the cab marker bulbs:
1. Make sure the headlamp control
is in the position, then remove
the screw and lens from the lamp
assembly.
2. Carefully pull the bulb straight
out of the socket and push in the
new bulb.
3. Install the lens on lamp assembly
with screw.
55
2007 F-650/750 (f67)
Supplement (supplement)
Canadian_French (fr_can)