Check Trans (Allison Automatic Transmission Only); Range Inhibit; Turn Signal; High Beams - Ford F650 Owner's Manual

Instrument Cluster
Check trans (Allison automatic
CHECK
transmission only): The lamp will
TRANS
illuminate for several seconds after
the ignition is turned to the ON
position. Illumination of this light indicates that a problem has been
detected and shifting may be restricted. Depending upon the severity of
the problem, the read-out digit on the shifter display may be blank.
Operation may continue in order to reach service assistance. The ECU
may not respond to shift selector requests, since operating limitations
are being placed on the transmission, i.e. upshifts and downshifts may be
restricted. Direction changes will not occur.
Refer to the Transmission Operator's Manual for more information.
Safety belt: Reminds you to fasten
your safety belt.
Range inhibit: Illuminates when
RANGE
the transmission is not engaged in
INHIBIT
the selected gear. The warning light
will go off when the gearshift lever
is adjusted in to the appropriate gear.
Refer to the Transmission Operator's Manual for more information.
Charging system: Illuminates when
the battery is not charging properly.
Turn signal: Illuminates when the
left or right turn signal or the
hazard lights are turned on. If the
indicators stay on or flash faster, check for a burned out bulb.
High beams: Illuminates when the
high beam headlamps are turned on.
Safety belt warning chime: Sounds when the key is in the ignition and
the driver's safety belt is not fastened.
Key-in-ignition warning chime: Sounds when the key is left in the
ignition in the OFF/LOCK or ACC position and the driver's door is
opened.
27